Chapter VIII: BIOGRAPHY.--DUPUY DE LOME--With portrait (2)

The age of gaseous fuel is commencing; and I feel daily, from the correspondence I receive, that there is a growing impression that gas is going to perform miracles. We do not need to go mad about it; and my own precept and practice is to employ gas only where its use shows a profit, either in time or money. Many of those present know that I am as ready to totally condemn gaseous fuel where it does not pay as to advise its use where some advantage is to be gained. You will understand that my remarks apply to coal gas only. As to producer or furnace gases, I know practically nothing, except that sometimes it pays better to burn your candle as a candle than make it into gas, and burn it as a gas afterward. The use of producer gas no doubt pays on a large scale; and things on a large scale, so far as gas is concerned, are not matters with which I have time to concern myself. The commercial use of coal gas has yet to be developed. It is in its infancy; and there are very few, if any, who have any conception of its endless uses, both for domestic and manufacturing purposes. The more general the information which can be given about its uses, the sooner it will find its own level, and the sooner the gas companies will appreciate the fact that their best customers are to be found among those who can use coal gas as a fuel for special work in manufacturing industries because it is profitable to use, and saves expensive labor. My own experiments with alloys of the rarer metals, which have not been concluded without profit to myself, would certainly never have been undertaken except with the use of gas furnaces, which were both practically unlimited in power and admitted of the most absolute precision in use; and I may safely say, without violating any confidence, that many of the precious stories and so-called "natural" products make their appearance in the world first in a crucible in a gas furnace.

At the conclusion of my lecture before the Institute at Leeds, on "Combustion and the Utilization of Waste Heat," Mr. Kitson, the Chairman, remarked that if he were a dreamer of dreams, he might look forward to the time when he would be growing cucumbers with the waste heat of his iron furnaces. Many wilder dreams than this have come true in the science of engineering; and the realization has brought honor and fortune to the dreamers, as you must all know. The history of engineering is full of the realization of "dreams," which have been denounced as absurdities by some of the best living authorities.

* * * * *

THE GAS METER

The gas meter was invented by Clegg in 1816. Since that epoch no essential modification has been made of its structure. Fig. 1 shows the principle of the apparatus, _mnpq_ is a drum movable around a horizontal axis. This is divided by partitions of peculiar form into four vessels of equal capacity, and dips into a closed water reservoir, RR'. A tube, _t_, near the axis, and the orifice of which is above the level of the water, leads the gas to be measured. This latter enters under the partition, _l'm_, of one of the buckets, and exerts an upward thrust upon it that communicates a rotary motion to the drum. The bucket, _l'mi_, closed hydraulically, rises and fills with gas until the following one comes to occupy its place above the entrance tube and fills with gas in turn. Simultaneously, as soon as the edge of each bucket emerges at _e_, the gas flows out through the opening that the water ceases to close, and escapes from the reservoir through the exit aperture, S. The gas, in continuing to traverse the system, is thus filling one bucket while the preceding one is losing its contents; so that, if the capacity of each bucket is known, the volumes of the gas discharged will likewise be known when the number of revolutions made by the drum shall have been counted. The addition of a revolution counter to the drum, then, will solve the problem.

The instrument, as usually constructed, is shown in Figs. 2 and 3.

The reservoir, RR' contains the measuring drum, _mmmm_, movable around the horizontal axis, _aa'_. The gas enters at E, passes at S into an opening that may be closed by a valve, and is distributed through the box, BB', which communicates with the reservoir through an orifice in the partition, _hh'_. This orifice is traversed by the axle, _aa'_. The box, like the reservoir, contains water up to a certain level, _r_. Through a U-shaped tube, _lnl'_, the gas passes from the box, BB', into the movable drum, sets the latter in motion, and makes its exit at S. In order to count the volume discharged, that is to say, the number of revolutions of the drum, the axle terminates at a in an endless screw which, by means of a cog wheel, moves a vertical rod that traverses the tube, _gg_, and projects from the box. As the tube, _gg_, dips into the water, it does not allow the gas to escape, and this permits of the revolution counter that the rod actuates being placed in an external case, CC'.

The counter consists of toothed wheels and pinions so arranged that if the first wheel makes one complete revolution corresponding to a discharge of 1,000 liters, the following wheel, which indicates cubic meters, shall advance one division, and that if this second wheel makes one complete revolution marked 10 cubic meters, the third, which indicates tenths, shall advance one division, and so on. Hands fixed to the axles of the wheels, and movable over dials, permit the volume of gas to be read that has traversed the counter.

The object of the other parts of the instrument are to secure regularity in its operation by keeping the level of the liquid constant. It is evident, in fact, that if the level of the water gets below _r_, the capacity of the buckets will be increased, and the counter will indicate a discharge less than is really the case, and _vice versa_. If the level descends as far as to the orifice in the partition, _hh'_, the gas will flow out without causing the apparatus to move. The water is introduced into the counter through _f_, which is closed with a screw cap, and passes through the opening shown by dotted lines into the reservoir, RR', whence it flows to the box, BB', When it has reached the desired level, it gains the orifice, _r_, of a waste pipe, escapes through the siphon, _ruv_, and makes its exit through the aperture, _b'_, when the screw cap of the latter is removed. If, by accident, the level of the water should fall below a certain limit, a float, _f_, which follows its every movement, would close the valve, _s_, and stop the flow of the gas. Finally a tube, _tt'_ soldered to the lower part of the tube, _lnl'_, and dipping into the water of a compartment, P, serves to allow the surplus water to flow out at _b'_. To prevent the apparatus from being disarranged upon the drum being revolved in the opposite direction, there is fixed to the axle, _aa'_, a cam which lifts a click, _z_, when the rotation is regular, but which is arrested by it when the contrary is the case.--_Science et Nature_.

* * * * *

DOBSON AND BARLOW'S IMPROVEMENTS IN HEILMANN'S COMBERS.

Next to the mule, there is no doubt that the most beautiful machine used in the cotton trade is Heilmann's comber. Although the details of this machine are hard to master, when once its action is understood it will be found to be really simple. The object of combing is to remove the short staples and the dirt left in after the carding of the cotton, such as is used in the spinning of fine and even coarse numbers. The operation is an extremely delicate one, and its successful realization is a good illustration of what is possible with machinery. Combing machines are usually made with six heads, and sometimes with eight. As the working of each head is identical, we only speak of one of them. By means of a pair of fluted feeding rollers a narrow lap, about 7½ in. wide, is passed into the head, in which the following action takes place: Assuming that the stroke is finished, the lap is seized near its end by a pair of nippers, so as to leave about half the length of the staple projecting. These projecting fibers are combed by a revolving cylinder, partially covered with comb teeth. When the front or projecting ends of the fibers are thus combed, a straight comb in front of the nippers drops into them, the nippers open, and the fibers are drawn through the straight comb. This combs the tail ends, and at the same time the fibers, now completely combed, are placed on or pieced to the fibers that had been combed in the previous stroke, producing in this way a continuous fleece of combed cotton. In short, in this most striking operation, the fiber during the combing is completely detached from the ribbon lap, carried over, and pieced to the tail end of the combed fleece, for a moment having no connection with either. Since the expiry of the patent, Messrs. Bobson and Barlow, of Bolton, have constructed a great many of these machines, and have found that, as compared with the original make, it was possible to greatly increase their efficiency. They accordingly devoted much attention to this object, and have patents for several improvements. To describe these so as to be understood by everybody would be a most difficult task, and would take more space than we can afford. We simply wish to record what these improvements are, and will suppose we are writing for those who have a good acquaintance with Heilmann's comber.

We give herewith a perspective view of the improved machine. On examination it will be noticed that an alteration is made in the motion seen at the end of the machine for working the detached rollers. This alteration we believe to be a decided improvement over Heilmann's original arrangement. It dispenses with the large detaching cam, the cradle, the notch-wheel, the catch and its spring, the large spur wheel which drives the calender roller, and the internal wheels for the detaching roller-shaft, substituting in their stead a much simpler motion, consisting of a smaller cam, a quadrant, and a clutch. The arrangement, having fewer parts, is also much more compact than the old one, for with the driving pulleys in the best position it enables the machine outside the framing to be shortened 10 in., an important point in a room full of combers. The action of this detaching motion is positive, and enables the machine to be run at a high speed without danger of missing, as happens when the point of the catch for the old notch-wheel becomes broken or worn away. Another important feature of the new arrangement is that it allows the motion of the detaching-roller to be varied. By an adjustment, easily made in a few seconds, the delivery may be altered to suit different classes of cotton or kinds of work without the necessity of changing the cams or the notch-wheels.

An improvement has been made in the construction of the nippers. In the ordinary Heilmann's comber, the upper blade has a groove in its nipping edge, and the cushion plate is covered with cloth and leather, the fibers being held by the grip between the leather of the cushion plate and the edges of the groove in the upper blade, or knife, as it is called. The objections to this mode of construction were that the leather on the cushion plate required frequent renewing, and unless the adjustment was more accurate than could always be relied on, the grip of the nippers was not perfect, for while at one end the nipper might be closed, at the other end it might be open wide enough to allow the cotton to be pulled through by the combing cylinder, and made into waste. In Messrs. Dobson and Barlow's nipper there is neither cloth nor leather on the cushion plate. Its edge is made into a blunt ^, upon which the narrow flat surface of a strip of India rubber or leather fixed in the knife falls to give the nip. By this plan the cushion is applied to the knife instead of to the plate, which of course makes the cushion plate, after it has once been set, a fixture; it also dispenses with the accurate setting, as is now necessary in the old arrangement. It further does away with the frequent and expensive covering of the cushion-plate with roller leather and cloth, thus effecting a considerable saving, not only in cost of material, but also in labor, inasmuch as the nipper knives can be taken off, recovered, and replaced in one-sixth the time required to cover the cushion plates and replace them on the old system. American cotton of 7/8" staple to silk of 2½" staple can also be combed by this improved arrangement, an achievement which has been attempted by many, but hitherto without arriving at any success. Messrs. Dobson and Barlow have however overcome the difficulty by their improvements, which combine three important qualities, viz., simplicity, perfection, and cheapness. Many hundreds of other makers' machines have been altered to their new arrangements. The cam for working the nipper has also been altered to give a smoother motion than usual; one that moves the nipper quietly and without jerks when the machine runs from 80 to 95 strokes per minute. A very decided improvement has been made in the construction of the combing cylinder. The combs are always fixed on a piece called the "half-lap," which, in its turn, is secured to a barrel called the "comb-stock." Now it is very desirable and important that these half-laps should be perfectly true and exactly interchangeable. When one half-lap is taken off for repairs, another half-lap must be ready to take its place on the cylinder. The original mode in which the cylinders were made rendered it a matter of mechanical difficulty--almost an impossibility in the machine shop--to produce them exactly alike. To avoid this difficulty, Messrs. Dobson and Barlow have reconstructed the combing cylinder, and the parts being fitted together by simple turning or boring, accuracy and interchangeability can always be depended upon. The screws which fasten the cylinder to the shaft are also cased up with the cylinder tins, thus avoiding any accumulation of fly on the screw heads.

The motion for working the top detaching, the leather, or the piecing roller, as it is variously called, has also been improved. The ends of this roller are always carried on the top of two levers that are oscillated by a connecting rod attached to their bottom ends. In the new motion the connecting rod is dispensed with, and one joint saved. The joint that remains is at the foot of the levers that carry the leather roller. This joint is constructed so that it may be easily altered, and by its means one of the most delicate settings of the combing machine, viz., that of the leather roller, may be made with greater readiness than with the old system. Further, from the mode of mounting these rollers another advantage is gained in the facility of setting them. In setting with the old arrangement, only one end of the roller is adjusted at a time; in the new, the adjustment sets the ends of two rollers. With regard to the leather roller also, it was found that as the round brass tubes in which its ends revolved had very little wearing surface, they got worn into flats on the outside, and thus worked inaccurately. In the machine under notice this defect is remedied. The tubes are made square on the outside, and having ample bearing surface they keep their adjustment perfectly.

On the top of the detaching roller is a large steel fluted roller carried at each end by a small arm called a "horse tail." In the original machine this roller simply kept its place upon the detaching roller by its weight, and when the machine came to be run at high speeds it was found that owing to its lightness the contact thus obtained was not reliable, the flutes or ribs of the roller slipping upon those of the detaching roller, which for good work is undesirable. This is remedied by placing a heavier top roller in the horse tails, which is made with a broader bearing so as to give greater solidity to the top roller. Another good idea we noticed in this machine was in the application of a treble brush carrier wheel, which permits of the brushes being driven at three different speeds as they become worn. For instance, when the brushes are new the bristles are long, and consequently they are not required to revolve as quickly as when the bristles are far worn. By this improvement the brush lasts considerably longer than in any other system of machine. Their speed can also be regulated according to the length of the bristles, and the change from one speed to the other can be effected in a very few minutes.

A common defect in combing machines is the flocking that frequently happens. This is the filling up of the combs on the cylinder with dirt and cotton, which the brush fails to remove. Although in general appearance the cleaning apparatus is the same as the ordinary one, modifications are introduced which make its action always effective and reliable. We were informed by a mill manager, who has a great number of these combers, that he meets with no inconvenience from flocking from one week end to another. Altogether, it will be seen that Messrs. Dobson and Barlow have almost reconstructed the machine, strengthening and improving those parts which experience showed it was necessary to modify. As a result their improved machine works at a high speed (80 to 95 strokes per minute, according to the class of cotton), with great smoothness and without noise, and from the almost complete absense of vibration the risk of breakages is reduced to a minimum.--_Textile Manufacturer_.

* * * * *

THE MUNICIPAL SCHOOL FOR INSTRUCTION IN WATCH-MAKING, AT GENEVA.

When, in 1587, Charles Cusin, of Autun, settled at Geneva and introduced the manufacture of watches there, he had no idea of the extraordinary development that this new industry was to assume. At the end of the seventeenth century this city already contained a hundred master watch makers and eighty master jewelers, and the products of her manufactures soon became known and appreciated by the whole world.

The French revolution arrested this impetus, but the entrance of the Canton of Geneva into the Confederation in 1814, rendered commerce, the arts, and the industries somewhat active, and watch-making soon saw a new era of prosperity dawning.

On the 13th of Feb., 1824, at the instigation of a few devoted citizens, the industrial section of the Society of Arts adopted the resolution to form a watch-making school, which, having been created by private initiative, was only sustained through considerable sacrifices.

In 1840 the school was transferred to the granary building belonging to the city. In 1842, when it contained about fifty pupils, it was made over to the administrative council of the city by the committee of the Society of Arts. From 1824 to 1842 the school had given instruction to about two hundred pupils. From 1843 to 1879 it was frequented by nearly eight hundred pupils, two-thirds of whom were Genevans, and the other third Swiss of other cantons and foreigners.

The school, then, has furnished the watch-making industry with the respectable number of a thousand workmen, among whom large numbers have been, or are yet, distinguished artists.

The rooms of the granary, where the school remained for nearly forty years, became inadequate, despite the successive additions that had been made to them, and it became necessary to completely transform them. The magnificent legacy that the city owes to the munificence of the Duke of Brunswick was partly employed in the reorganization, and the school is now located in a vast building designed to answer the requirements of instruction. This structure, which is located in Necker Street, presents an imposing and severe aspect. The main building embraces most of the workshops, the office, the library, and the classroom for instruction in mechanics, all of which receive a direct light. At right angles with the main building are two wings. The one to the north contains in its three upper stories workshops occupied by classes in escapements, bezil setting, compensating balances, and ruby working. On the ground floor are installed juvenile schools.

The south wing contains halls for lectures on theory, and two workshops looking toward the north. The ground floor is used for the same purpose as that of the north wing.

Finally, in the center of the main building is a wing parallel with its two mates. It is in this that is located the vast staircase that leads to spacious landings at which ends on every story a large corridor common to all the halls and workshops. It is in this part of the building that we find the amphitheater of physics and chemistry and the laboratories. Here also is located the museum in course of formation (gotten up in view of the historical study of watch-making), and the amphitheater designed for certain public lecture courses.

In the way of heating and lighting all parts of the building nothing has been neglected, and special care has been taken to have the ventilation perfect.

At present the instruction comprises a practical and a theoretical course.

_Practical Instruction_.--This is divided into three sections: (1) an elementary one having in view the construction of the simple watch in its essential parts; (2) a higher section in which the pupils learn to recognize the complicated parts; and (3) a section of mechanics applied to watch-making and to the study of the construction of machines and tools for facilitating and improving the manufacture.

1. _Elementary Section, First Year_.--The pupil must manufacture all the small tools necessary for making unfinished movements; that is, drills, reamers, punches, files, etc. He must then learn to file and turn, and to make use of the finishing lathe with the bow, or of the foot lathe.

In general, the time taken by an apprentice to manufacture his tools is from two to three months, and he can scarcely go to work on the movements before this.

In this class the regular pupils have to execute seven pieces of work in the rough, two for horizontal escapements with key and regulating wheel, and five for various other escapements. Among these there is one for simple repetition and one for minute piece. Aside from the work fixed by the programme, the pupils may manufacture all the other complicated pieces upon obtaining the authority for it from their masters and the director.

The average time employed in performing the work imposed by the programme necessarily depends upon the capacity of the pupil, but we may say that in general ten months are necessary.

_Second Year_.--After executing his last piece of work in a satisfactory manner, the apprentice passes into the class in regulators, where he begins to manufacture the small tools that he will require.

In this work, as in the preceding, he must take all his pieces from the crude metal, and he must do the forging himself, as well as the roughing down, the turning, filing, and shaping, and finally the finishing, without the aid of any other machine than the dividing one.

In general, after eighteen months of work, the apprentice goes to the finishing shop, where the delicate and minute work begins, pivoting, putting the wheels in place, and practical study of gearings. After learning how to divide a wheel correctly, he is set to work on pinions and wheels in the rough, which he must rivet, finish, and pivot according to the different planes of the pieces that have been calculated and executed by him under the direction of the master.

The programme to be followed by the pupils of the class in finishing is, as regards number of pieces, the same as that of the preceding classes, that is to say, seven.

In general, the pupil passes from the class in finishing to the class in dial-trains, where he makes two of these for his pieces--one a simple and the other a minute train. The teaching of this part is very important as regards the manufacture of escapements. In constructing the dial train, the pupil perfects his filing and learns to make the adjustments correct.

The last class in the elementary instruction is the one in escapements (Fig. 1), the programme of which includes several distinct parts: (1) The tools that are strictly necessary; (2) escapement and cylinder adjustment; (3) making the compensating balances for the pupil's pieces; (4) pivoting, putting in place, and finishing the escapements in regulating pieces. Here, as in the preceding classes, the pupils must do all the work themselves. During their stay in the elementary classes the work done is submitted to the director, who examines it and sends it back to the instructors accompanied with a bulletin containing his estimate as to its value, and his observations if there is occasion to make any.

Pupils who cannot or who do not wish to go over the entire field of the programme stop here, and are now capable of earning their living and of lightening the load that oppresses their parents.--_Science et Nature_.

* * * * *

MACHINE FOR POLISHING BOOTS AND SHOES.

The principle of an apparatus for blackening boots and shoes dates back to 1838, the epoch at which a machine of this kind was put into use at the Polytechnic School. Since then it seems that not many applications have been made of it, notwithstanding the services that a machine of this kind is capable of rendering in barracks, lyceums, hotels, etc. Mr. Audoye, an inventor, has recently taken up the question again, and has proposed to The Société d'Encouragement a model that gives a practical solution of it. The use of this will allow a notable saving in time and trouble to be effected.

This brush (see engraving) revolves around a horizontal axle supported by a cast iron frame similar to that of a sewing machine. Motion is communicated to it by a double pedal, which actuates a connecting rod and a system of pulleys. The external surface of the brush contains three channels in which the foot gear to be polished is successively placed. In the first of these the dust and mud are removed, in the second the blacking is spread on, and in the third the final polish is obtained.

In order to guide the blacking to that part of the brush which is to receive it, Mr. Audoye protects the lower part of the latter by a half-cylinder of sheet iron. On this there is placed a vessel containing the blacking, and into which dips a copper cylinder having a grooved surface. The horizontal axis of this cylinder is movable; when at rest it is so placed that the cylinder is an inch or so below the brush, but when the operator pulls a button that is within reach of his left hand, the axis is lifted, a contact takes place between the brush and the cylinder, and the former is thus given a rotary motion. As the cylinder still continues to dip into the blacking, the latter is thus spread ever the brush.--_La Genie Civil_.

* * * * *

PERSONAL SAFETY WITH THE ELECTRIC CURRENTS.

_To the Editor of the Scientific American_:

In your paper of the 21st of February there is an article on personal safety with electric currents, by Prof. A.E. Dolbear. He says that a Holtz machine may give through a short wire a very strong current. For if E = 50,000 volts, R = 0.001 ohm, then C = 50000/0.001 = 50,000,000 amperes. Now that is a very large quantity of electricity, and is equal to an enormous horse power. I think the person receiving that charge would not need another. According to Ohm's law, the strength of current is proportional to the electromotive force divided by the total resistance, external and internal. The last is a very important element in the Holtz machine, and will make a big difference in the current strength. Here are some of the results obtained from experiments made with the Holtz machine. A machine with a plate 46 in. in diameter, making 5 turns in 3 seconds, produced a constant current capable of decomposing 3½ millionths of a milligram in a second. This is equal to the effect produced by a Grove's cell in a circuit of 45,000 ohms resistance. The current produced would be about 0.0000044 ampere. That is rather small compared with the Professor's result. Rossetti found that the current is nearly proportional to the velocity of rotation. It increases a little faster than the velocity.

The electromotive force and resistance is constant if the velocity is constant. The electromotive force is independent of the velocity, but diminishes as the moisture increases, and is about equal to 52,000 Daniell cells. The resistance when making 120 revolutions per minute is 2,810 million ohms. At 450 per minute, 646 million.

Taking it at 450, C = 53950/64600000.001 = 0.0000835 ampere, against the Professor's 50,000,000, amperes, and it would be equal to about 0.006 horse power, which I think would be the more correct of the two; calling E equal to 50,000 Daniell cells.

Yours, Respectfully,

E. ELLSWORTH.

Portland, Me., March 5, 1885.

* * * * *

A VISIT TO CANADA AND THE UNITED STATES IN THE YEAR 1884.

[Footnote: A lecture delivered before the Society of Telegraph Engineers and Electricians, London, Dec. 11, 1884.]

By Mr. W.H. PREECE, F.R.S.

I do not know what the sensations of a man can be who is about to undergo the painful operation of execution; but I am inclined to think his sensations must be somewhat similar to those of a lecturer, brimful of notes, who has to wait until the clock strikes before he is allowed to address his audience.

The President has been kind enough to refer to the paper I propose to give you, as "Electricity in America in the year 1884;" but I would rather, after having thought more about it, that it be called "A Visit to Canada and the United States in the year 1884."

It will be in the recollection of a good many who are present that in the year 1877 I visited America, in conjunction with Mr. H.C. Fischer, the Controller of our Central Telegraph Station, to officially inspect and report upon the telegraph arrangements of that country; and on the 9th February, 1878, I had the pleasure of communicating to the members of this Society my experiences of that visit.

During the present year my visit was not an official one; I went for a holiday, and specially to accompany the members of the British Association, who, for the first time in the history of that association, held a meeting outside the limits of the United Kingdom.

We sailed from Liverpool in a splendid steamship called the Parisian. There were nearly 200 B.A. members on board; and notwithstanding the fact that rude Boreas tried all he could to prevent us from reaching the other side of the Atlantic; notwithstanding the fact that the Atlantic expressed its anger in the most unmistakable terms at our audacity in turning from our native shore; notwithstanding the fact that Greenland's icy mountains blew chilly blasts upon us, and made us call out all the warm things we possessed--I say notwithstanding all this, we reached the Gulf of St. Lawrence in safety, and I do not think that a merrier or a happier crew ever crossed the Atlantic.

There is one very interesting fact that is not generally known, and I certainly was unaware of it before I started, in connection with this particular route across the Atlantic, and that is, that by it the ship passes within only 200 miles of Greenland. The great circle that directs the shortest route from the north of Ireland to the Straits of Belle Isle passes within the cold region, and hence, while you were all sweltering in heat in London, we were compelled to bring out our ulsters and all our warm garments, to enable us to cross with any degree of comfort. The advantage of this particular route is supposed to be the fact that only five days are spent upon the ocean, and the remainder of the voyage is occupied in the calms and comforts of the Gulf and River St. Lawrence. But I am inclined to think that the roughness of the ocean and the coolness of the weather at all seasons are quite sufficient to prevent anybody from repeating our experience.

We arrived at Montreal in time to attend the opening meeting of the British Association; and at Montreal we were received with great hospitality, great attention, and great kindness from all our brethren in Canada, and we held there certainly a very successful and very pleasant gathering. There were 1,773 members of the British Association altogether present, and of that number there were 600 who had crossed the Atlantic; the remainder being made up of Canadians, and by at least 200 Americans, including all the most distinguished professors who adorn the rolls of science in the United States. As is invariably the rule in these British Association meetings, we had not only papers to enlighten us, but entertainments to cheer us; and excursions were arranged in every direction, to enable us to become acquainted with the beauties and peculiarities of the American continent. Some members went to Quebec, some to Ottawa, others to the Lakes, others to Toronto, many went to Niagara; and altogether the arrangements made for our comfort and pleasure were such, that I have not heard one single soul who attended this meeting at Montreal express the slightest regret that he crossed the Atlantic.

The meeting at Montreal certainly cannot be called an electricians' meeting. The gathering of the British Association has often been distinguished by the first appearance of some new instrument or the divulgence of some new scientific secret; but there was nothing of any special interest brought forward on this occasion. The only real novelty or striking fact that I can recall as having taken place was a remarkable discussion that originated by Professor Oliver Lodge, upon the "Seat of the Electromotive Force in a Voltaic Cell."

This was an experiment on the part of the British Association. Discussions, as a rule, have not been the case at our meetings. Papers have been read and papers have been discussed; but on this occasion three or four subjects were named as fit for discussion, and distinguished professors were selected to open the discussion.

On this particular subject, Professor Oliver Lodge opened the discussion, and he did so in an original, an efficient, and in a chirpy kind of manner that took by storm not only the professors who knew him, but those who did not know him; and I am bound to say that I do not think we could possibly better spend an evening during the coming session, or more profitably, than by asking Professor Oliver Lodge to bring the subject before this Society, so as to allow us on this side of the water to discuss the same subject.

Of course the prominent figure at our meetings was Lord Rayleigh; and I do not think that any person could possibly have been present at those meetings of the British Association without feeling an intense personal admiration for this man, and an affection for the way in which he maintained the position of an English gentleman and the credit of an English scientific body, to the astonishment and delight of every one present. Then, again, we had our past President, Sir William Thomson, who was not quite so ubiquitous as usual; he did not dance from section to section as he usually does, but remained as president of his own section, A. I think he only left his section for a day, and that was to attend the electrical day in Section G; but in his own section he brought down those words of wisdom that one always hears from him, and which make one always regret that there is not always present about him a shorthand writer to take down thoughts and ideas that never occur again, and are only heard by those who have the benefit of being present.

The subjects brought forward were not of intense interest. We had a paper by Dr. Traill, describing the Portrush Railway, and there were various other papers; and I can pass over some of the other subjects, because I shall have to deal with them under another head. But while we were in Montreal, a deputation of American professors and members of the American Association came over, and invited a good many of those who were present at Montreal to visit the American Association at Philadelphia. I was one of those who went over to America simply and solely for a holiday, and I am bound to say that I set my face determinedly against going to Philadelphia. I traveled with two charming companions, and we all decided not to go to Philadelphia. But the compact was broken, and we capitulated, and went from the charming climate of Montreal into the most intense heat and into the greatest discomfort that I think poor members of the Telegraph Engineers' Society ever experienced. We entered a heat that was 100° by day and 98° by night; and I do not think there is anybody in this room, unless he has been brought up in the furnace-room of an Atlantic steamer, who can fully appreciate the heat of Philadelphia in these summer months. The discomforts of the climate were, however, amply compensated for by the hospitality and kindness of the inhabitants. We spent, in spite of the heat, a very pleasant time.

Before referring further to the meetings at Philadelphia, I may just mention the other journeys that I took. My holiday having been broken by the rupture of the union to which I have alluded, I had to devote it then to other purposes, and, in addition to Montreal and Philadelphia, I went to New York (to which I shall refer again), from New York to Buffalo, then to Lake Erie and Cleveland, and on to Chicago, where I spent a week or more. From Chicago I went to see the great artery of the West--the Mississippi. I stopped for a day or two at St. Louis. One remarkable fact came to my knowledge, and I dare say it is new to many present, and that is, that the Mississippi, unlike other rivers, runs uphill. It happens, rather curiously, that, owing to the earth being an oblate spheroid, the difference between the source of the Mississippi and the center of the earth is less than that of its mouth and the center of the earth, and you may see how this running up hill is accounted for.

From St. Louis I went to Indianapolis, thence to Pittsburg, where they have struck most extraordinary wells of natural gas. Borings are made in the earth from the crust to a depth of 600 or 700 feet, when large reservoirs of natural gas are "struck." The town is lighted by this gas, and it is also employed for motive power. In Cleveland, also, this natural gas is found, and there is no doubt that it is going to economize the cost of production very much in that part of the country. From Pittsburg I went to Baltimore, where Sir William Thomson was occupied in delivering lectures to the students of the Johns Hopkins University. In all these American towns one very curious feature is that they all have great educational establishments, endowed and formed by private munificence. In Canada there is the McGill University, and in nearly every place one goes to there is a university, like the Johns Hopkins at Baltimore, where Johns Hopkins left 3,500,000 dollars to be devoted entirely to educational purposes; and that university is under the management of one of the most enlightened men in America, Professor Grillman, and he has as his lieutenants Professors Rowland, Mendenhall, and other well-known men, and each professor is in his own line particularly eminent. Sir William Thomson delivered there a really splendid course of lectures. From Baltimore I went through Philadelphia to Boston. I visited Long Branch, and I spent a long time in New York, so that from what I have said you will gather that I spent a good deal of my time in the States. Wherever I went I devoted all my leisure time to inquiry into the telegraphic, telephonic, and electric light arrangements in existence. I visited all the manufactories I could get to, and I did all I possibly could to enable me to return home and afford information, and perhaps amusement, to my fellow-members of this Society.

As an illustration of the intense heat we experienced, I may mention that it was at one time perfectly impossible to make the thermometer budge. The temperature of the blood is about 97 or 98 degrees, and if the temperature of the air be below the temperature of the blood, of course when the hand is applied to the thermometer the mercury rises. In one of our journeys up the Pennsylvania Road we tried to make the thermometer budge as usual, but could not, which proved that the temperature of the air inside the Pullman car in which we traveled was the same as that of the blood.

The American Association is of course based on the British Association. Its mode of administration is a little different. It is divided into sections, as is the British Association, but the sections are not called the same. For instance, in the British Association, Section A is devoted entirely to physics, but in the American Association, Section A is devoted to astronomy and Section B to physics. In the British Association, Section G is devoted to mechanics, but in America Section D is devoted to that subject. But with the exception of just a change in the names of some sections which are familiar as household words to members of the British Association, the proceedings of the American Association do not differ very much from ours. They have, however, one very sensible rule. The length of every paper is indicated upon the programme of the day's proceedings, and the continuation or the stopping of any discussion on that paper is in the hands of the section. For instance, if the President thinks that a man is speaking too long, he has only to say, "Does the meeting wish that this discussion shall be continued, or shall it be stopped?" A majority on the show of hands decides. Such a practice has a very wholesome effect in checking discussion, and I certainly think that some of our societies would do well to adopt a rule of the same character.

The meeting of the American Association, again, was not distinguished by any particular electrical paper, or any new electrical subject. The main subject that was brought before us was the peculiar effect called "Hall's effect," that Professor Hall, now of Harvard College, and then assistant to Professor Rowland, discovered in the powerful field of a magnet when a current was passed through a conductor; and a description of that effect (which he at one time thought was an indication that electricity was something separate from matter) formed the subject of two debates that lasted for nearly the whole of two days. I am bound to say that in that prolonged discussion the members of this Society held their own. I see two very prominent members present who spoke on most of the electrical subjects dealt with--Professor G. Forbes, who knows what he says and says what he knows, and Professor Silvanus Thompson, who held his own under very trying circumstances.

At the same time that this meeting of the American Association was being held at Philadelphia, where we were treated with marvelous hospitality,--excursions, soirées, dinners, parties, etc., etc.--and as though it were not quite sufficient to bring over humble Britishers from this side of the Atlantic to suffer the intense heat at one meeting of the Association, they held at the same time an Electrical Conference. There was a conference of electricians appointed by the United States Government, that was chiefly distinguished on the part of the American Government by selecting those who were not electricians. But many attended the Electrical Conference who stand high as electricians, one especially, who, though perhaps from want of experience he did not shine very brilliantly as a chairman, certainly stands as one of the ablest electricians of the day--I mean Professor Rowland. The Conference was held under Professor Rowland's presidency, and nearly all the well-known professors of the United States attended. The Conference was established by the United States Government to take into consideration the results and conclusions arrived at by the Congress of 1884, held in Paris. The Paris Congress decided upon adopting certain units of resistance of electromotive force, of current, and of quantity, and they determined the particular length of a column of mercury that should represent the ohm--a column of mercury 106 centimeters long and of one square millimeter in section. It was necessary that the United States should join this Conference, so a commission was appointed to consider the whole matter. All these units were brought before them, as well as the other conclusions of the Paris Congress, such as the proper mode of recording earth currents and atmospheric electricity. The Paris units were adopted in face of the fact that the length determined upon at Paris was not the length that Professor Rowland himself had found as that which should represent the ohm. It differed by about 0.2, as near as I can remember; but it was thought so necessary that uniformity and unanimity should exist all over the world in the adoption of a proper unit, that all differences were laid aside, and the Americans agreed to comply with the resolutions of the Paris Congress.

There were two units that I had the temerity to bring forward, first, at the British Association, and secondly, before the Electrical Conference. It will be remembered, that at the meeting of the British Association at Southampton in 1882, the late Sir W. Siemens proposed that the unit of power should be the watt, and that the watt, which was derived from the C.G.S. system of absolute units, should in future, among electricians, be the unit of power. This was accepted by the British Association at Montreal, and it was also accepted by the American Electrical Conference at Philadelphia. But I also, at Montreal, suggested that as the watt was the unit of power, so we ought to make some multiple of that unit the higher unit of power, comparable to that which is now represented by the well-known term "horsepower." Horsepower, unfortunately, does not form itself directly into the C.G.S. system. The term horsepower is a meaningless quantity; it is not a horsepower at all. It was established by the great Watt, who determined that the average power exerted by a horse was equal to about 22,000 foot pounds raised per minute; but this was thought by him to be too little, so he increased it by 50 per cent., and so arrived at what is the present horsepower, 33,000 foot pounds raised per minute. Foot pounds bear no relation to our C.G.S. system of units, and it is most desirable that we should have some unit of power, somewhere about the horsepower, to enable us to convert at once watts into horsepower. For that purpose I proposed that 1,000 watts, or the kilowatt, should replace what is now called the horsepower, and suggested it for the consideration of engineers. It has been received with a great deal of consideration by those who understand the subject, and a considerable amount of ridicule by those who do not. It is rather a remarkable thing that, as a rule, one will always find ridicule and ignorance running side by side; and it is an almost invariable fact that when a new proposition is brought forward, it is laughed at. I am always very glad to see that, because it always succeeds in drawing attention to the matter. I remember a friend of mine, who had written a book, being in great glee because it was severely criticised by the _Athenæum_, a fact which drew public attention to the book, and caused it to make a great stir. So when I proposed that the horsepower should be increased by 33 per cent., and made equivalent to 1,000 watts, I was not at all sorry to find that I had incurred the displeasure of the leader writers in nearly all our scientific papers, and I was quite sure that the attention of those who would not perhaps have thought of it would thereby be drawn to the matter. Some people object to the use of a name, this name "watt." When you have fresh ideas, you must have fresh words to express those ideas. The watt was a new unit, it must be called by some name, otherwise it could scarcely be conveyed to our minds. The foot, the gallon, the yard, were all new names once; and how do we know that they were not derived from some "John Foot," "William Gallon," or "Jack Yard," or some man whose name was connected with the measure when introduced? The poet says:

"Some mute, inglorious Milton here may rest-- Some Cromwell, guiltless of his country's blood:"

so in these names some forgotten physicist or mute engineer may be buried. At any rate, we cannot do without names. The ohm, the ampere, the volt, are merely words that express ideas that we all understand; and so does the watt, and so will the 1,000 watts when you come to think over the matter as much as some of us have done.

At this Conference several other subjects were brought up which attracted a good deal of attention. Professor Rowland brought forward a paper on the theory of dynamos that certainly startled a good many of us; and it led to a discussion that is admirably reported in our scientific papers. I think that the discussion evolved by Professor Rowland's paper on the theory of dynamos deserves the study of every electrician; it brought very strongly into prominence one or two English gentlemen who were present. Professor Fitzgerald, of Dublin, spoke with a considerable amount of power, and showed a mastery of the subject that was pleasant not only to his friends, but must have been gratifying to the Americans who heard him. On this particular subject of dynamos it was truly wonderful how the doctors disagreed. Two could not be found who held the same views on the theory and construction of the dynamo, and that shows that we still have a great deal to learn about the dynamo, and that the true principle of construction of it has yet to be brought out.

It is a very curious thing, and I thought about it at the time, that when you consider the dynamos in use, you see how very little has been done to perfect the direct working dynamo in England. Although the principle of the dynamo originated with Faraday, yet all the early machines, Pacinotti, Gramme. Hefner von Alteneck, Shuckert, Brush, Edison, and several others who have improved the direct action machine, have not been found in England. But when we deal with alternate-current machines, then we find the Wilde, Ferranti, and various others; so that the tendency in England has been very much to improve and work upon the alternate-current machines. In other countries it is exactly the reverse; in fact, in America I never saw one single alternate-current machine. When Professor Forbes wanted an alternate-current machine to illustrate a lecture that he gave, it was with the greatest difficulty that one could be found, and, in fact, it was put together specially for him.

The other subjects brought before this Conference were Earth Currents, Atmospheric Electricity, Accumulators or Secondary Batteries, and Telephones. There was an extremely able paper brought forward by Mr. T.D. Lockwood, the electrician of the American Bell Telephone Company, on Telephones, and the disturbances that influence their working. When that paper is published, it will well be worth your careful examination.

Papers were also read on the Transmission of Energy, and there were papers on many other subjects.

So much for the Electrical Conference.

Now, the Americans at the present moment are suffering from a mania which we, happily, have passed through, that is, the mania of exhibitions.